Premium glass door

Il. 10

This fresh new fitting for sliding door, the il.10 is manufactured primarily from aluminium with delicate, customizable stainless steel accents. The fitting offers a high level of elegance for sliding door and clarity thanks to its high-quality workmanship and purist design. The il.10 is perfect for living areas, cabinetry, office and presentation spaces.

The il.10 is a door fitting designed with a highly developed cushioning mechanism even for heavy door weights up to 200 kg, providing extra convenience and safety. The sliding door can be stopped gently in its movement and pulled to its end position nearly soundlessly.

The fiitting won awarded for high design quality in the Red Dot award: product design 2013!

Most of the primarily from aluminium manufactured fitting is integrated into the wall (37.5 mm deep, 94 mm high) ensuring that only aluminum and stainless steel surfaces in connection with the sliding door’s glass pane are visible: two cover plates, 45 mm each, plus the 15 mm groove to which a colored background can be added.

The il.10 fitting for sliding door can be used with wood panels or other panel materials as well.



S.200

S.200 is a fitting for sanitary and changing room areas. In these places, architecture is often neglected. With S.200 there is solution. In addition to the hygienic advantages, the door fitting can create various installations and hold different types of glass. Tempered glass, LED glass with installed LED diodes, prined glass or foils..every idea achieves different visual effect. All parts of the Astec S.200 fittings are made out of 1.4305 stainless steel, includin all necessary connecting and retaining parts. Manufacturedon cnc, with visible surfaces ground and finely brushed, matt.

B.400 / B.410

Contemporary architecture demands flexible room solutions. Intelligent solutions are created with B.400 and B.410 system, that transfers loads downwards instead of carrying them from the top. The plain stainless steel wheel comprises two turned wheel discs fitted either side of the sliding element, made out of glass, fine wood, black granite, polished metal or lacquered wall panels, for example. The wheel runs smoothly and quietly in a grooved floor track, even in the case of high loads. All parts of the B.400 or B.410 fitting are made out of stainless steel 1.4305, including all necessary connecting and retaining parts. Manufactured on cnc, with visible surfaces ground and finely brushed, matt.

Wide range of beautiful accessories includes door handles in variety of lenghts, made out of the best stainless steel. Door locks are also available.

The variation of fitting B.400, the roller fitting B.410, runs along a flat stainless steel guide track fixed to the finished floor – b x h = 20 mm x 5 mm.

The stainless steel surface of the roller and guide track is matt, ground and brushed. the load is transferred directly to the floor rail via notches on the inner side of the wheel discs. All other technical features as well as optical appearance correspond to fitting B.400.

B.500 / B.510

Entrance and thoroughfare areas are often aesthetically accentuated visiting cards. But the same are living areas or office spaces. The fitting B.500 allows this impression by being pleasantly inconspicuous. At the same time, the swinging door fitting underscores the generous visual effect of a transparent, inviting entrance area. The optional offsetting of the pivot point towards the centre of the door leaf extends the effect of the opening. the small hinge plates out of matt, brushed stainless steel have a clear, sophisticated effect. The hinges are available in rounded (fitting B.500) or angular form (fitting B.510). Elegant for room-high doors or in all-glass installations for glass walls. Ceiling retainers for skylight configurations are also available. The fitting can be applied with lock case and stop or as swing door fitting.

Likewise in connection with floor-mounted door closer* for all-glass installations, windscreens, etc. the floor retainer, Extending just 20 mm into the floor, is fitted with a slide bearing so that the door can be pushed open with minimum effort. The extensive range of accessories such as astec stainless steel lock “slim lock”, pull handles, flush pulls, floor-mounted door closer, etc., is available for this swinging glass door fitting.

B.500 is swinging door fitting for interior doors with individually offset pivot point. The door leaf sits between the “stainless steel on show” bands and is supported in the middle on a semi-circular, invisible saddle.  Glass edge cutaways required for floor and ceiling retainers. cylindrical floor retainer can be recessed flush into floor or it can also be fitted free-standing on the floor. It can be adjusted precisely and it is fitted with slide bearings for easy running.

In the case of all-glass installations, the ceiling fitting is made of two pairs identical clamping brackets. The ceiling retainer with its thin shape can be adjusted. All partsof the Astec b500 fitting are made out of stainless steel 1.4305, including all necessary connecting and retaining parts. Manufactured on cnc, with visible surfaces ground and finely brushed, matt.

Wide range of beautiful accessories includes door handles in variety of lenghts, made out of the best stainless steel. Door lock with handle is also available in different lenghts. It is up to you wheter the door will look more classical or edgy with the 500mm long lock.

The swinging door fitting B.500 is available in rounded form or, alternatively, in angular form as fitting B.510.

 

B.600 / B.610

The door fitting B.600 is suitable for all door widths, single, double and multi-leaf door. It can be used one, two or more tracks. It is suitable for wet and dry areas. It bosts absolute ease of use with smooth running, perfect runner technology, particulary suitable for glass door leaves and in connection with glass walls. The system is also capable of bearing many other materials than just glass door. From metal to granite and wood, the installation is completely straightforward thanks to simple through-holes in the door leaf.

All parts of the B.600 or B.610 fitting are made out of stainless steel 1.4305, including all necessary connecting and retaining parts. Manufactured on cnc, with visible surfaces ground and finely brushed, matt.

Although closely related to the B.600 fitting, the system B.610 opens up new possibilities of interior design. Guilding of the door leaf from one side allows doors to extend the full room height. Rooms appear more spacious. Runners and counter-runners are fixed directly in the glass. An elegant and inconspicuous fitting for glass doors with one or two leaves. Direct wall or ceiling installation. Very exclusive for all-glass installations. Max. weight of door leaf 120 kg. Door leaf materials: glass, wood, granite, etc.

Wide range of beautiful accessories includes door handles in variety of lenghts, made out of the best stainless steel. Door locks are also available.

B.700

Unobtrusive slide door fitting for smaller systems and door leaves up to 100 kg in weight. The special feature is the vertically mounted flat steel track and the slim, smoothly gliding runners. Simple design principle offering great potential: for inside and outside. The B.700 system is great for office and sanitary areas. The glass door fitting is for practical storage solutions, not just for the home.

Elegant design with the effect “stainless steel on show”. Sliding door fitting with solid stainless steel flat supporting rail, 50 mm x 6 mm. particularly suitable for “fixtures”. Door leaf runs beside the supporting rail. Room-high doors without sky light are possible. Maximum door weight is 100 kg and heavier weights are on enquiry. Four stainless steel runners per fitting with polyamide running surface fitted with ball bearings for quiet, easy and accurate running. The counter runner acts as retainer to prevent glass door lifting out.

Brackets for wall mounting and all-glass installations are available. The stainless steel end stoppers have flexible positioning. The flat supporting rail is particularly adaptable for special circular installations (showers, reception areas, etc.).
All parts are made out of stainless steel 1.4305 or 1.4301 (supporting rail). including all necessary connecting and retaining parts. Manufactured on cnc precision milling and boring centres. Visible surfaces ground and finely brushed, matt. The production plant is certified according to DIN EN ISO 9001:2008.

B.800

The sliding door fitting B.800 extends the range of application of “stainless steel on show” glass door fittings in living and property areas. The door fitting was granted the international Red Dot design award 2008 and is nominated for the design award 2009 of Germany. Without departing from the classic, unpretentious elementary form, the refinement in the slender supporting hanger and in the structural supporting elements, makes the new glass door fitting B.800 appear transparent and lightweight.
Screw connections are no longer visible. Edges and surfaces of the separate elements enhance the play of light and underline the superior workmanship of the material.

B.800, visible stainless steel fitting for sliding doors. Single, double and multi-leaf. one, two or more tracks. For sliding door leaves out of glass, wood, mineral materials, etc. up to 110 kg in weight. With retaining brackets for all-glass installations or with brackets (permitting 3d adjustment) for direct wall installation.

The sliding door fitting B.800 is particularly suitable for sliding door solutions up to approximately 1200 x 2500 mm (width x height). Supporting rods over 3000 mm long are joined out of suitably transportable rod lengths by means of an inner coupling. Special brackets for ceiling installation as well as for multi-track installations are available.

All parts are made out of stainless steel 1.4305 or 1.4301 (supporting rod). Including all necessary connecting and retaining parts. Manufactured on high precision cnc-machining-centres. All visible surfaces ground and finely brushed, matt.

B.900

This sliding glass door fitting with the “angled supporting arm” stands for strength and solidity; a fitting without compromise. B.900 is formally reduced to a minimum, its effect is not aimed at prestige but is plain and simple. Both functionality and design focus on the essentials.The intelligent minimalization extends to the striking, solid supporting rail that appears to be freely suspended.

The sliding door fitting B. 900 is a component of interior design. A wide range of door leaf materials form a symbiosis with the sliding door fitting B.900: glass in all variations from transparent to decorative, laminated sheet safety glass with printed foils and inlays, blended mineral materials in stone finish, fine wood or a variety of synthetic materials. Added design feature: alternative positioning of the door fitting on the door leaf allows additional variations of the sliding door look.

Fastening elements are just as invisible as the auxiliary elements: door stoppers and glass panel retainers. Both functions are integrated in the supporting rail and hidden from view. The glass door fitting B.900 is devised to be noticed without obtruding. As a result, its design is uncompromising: the newly developed running gear with transparent rollers is the visual attraction. The intentionally selected UV-resistant polyamide material not only lends the rollers the appearance of glass, but is also characterized by solidity and durability.

Precision ball bearings guarantee smooth, cushioned running. All parts are made out of stainless steel 1.4305 or 1.4301 (supporting rod). Including all necessary connecting and retaining parts. Manufactured on high precision cnc machining-centres. All visible surfaces ground and finely brushed, matt. The production plant is certified according to DIN EN ISO 9001:2008.



B.1000

Modern interior design increasingly demands the flexible use of space. The roller fitting B.1000 for sliding panels and door not only offers new freedom in design, but also opens up completely new perspectives in terms of room planning, division and utilization of space. As the B.1000 is invisible at first glance, rooms take on exceptional clarity and simplicity and the glass walls appear to be be floating through the space. Glass panels without frames, glass panels without visible fittings silently glide across the room with no apparent effort.

B.1000 fitting for sliding door and panels functions “underfloor”: customized to your specifications, narrow, shallow roller guide tracks integrated in the floor bear weights of up to 300 kg per metre. it takes a second, closer look to recognize the approximately 25 mm wide and 6 mm deep roller guide track.

The small rollers over which the glass panels glide are barely visible. They are protected and cushioned by a U-profile edge guard that is firmly fixed to the glass. flush-fitted U-profile tracks in the ceiling hold and guide the panel. The weight is taken by the floor. Complex support installations in the ceiling are not required. The fitting Astec b1000 is suitable for 10 mm and 12 mm glass panels.

All parts are made out of extruded aluminium sheath. Precision needle roller bearings.